Trencor
December 3, 2019
SHUANGLIN HDPE PIPE
The reliable piping system for drinking and industrial water applications with special characteristics because it is made from polyethylene.
Polyethylene has excellent water, chemical and electrical resistance. So it is widely used to make food containers (including milk bottles), as electrical and telecommunication cable insulation, on rough terrain (e.g.: mountain, swamps, earthquake prone area, etc.), and as chemicals distribution line.
INTERNATIONAL QUALITY
- HDPE/PP Double Wall Corrugated Pipe – comply with ISO EN 13476 standard
- HDPE Spiral Pipe – Comply with ISO EN 13476-3 and DIN 16961 standard
- HDPE Solid Wall Pipe – Comply with SNI 4829.2:2015 and ISO 4427:2007
FLEXIBLE
It is a pipe with high flexibility, suitable for use in rough terrain like mountainous, earthquake-prone, and swamp areas.
LIGHTWEIGHT
Easy and inexpensive in logistics and installation. Because the walls are thin, small pipes can be put into larger pipes. Thus saving shipping costs significantly
SPECIFICATIONS MADE TO ORDER
- The inner diameter can be ordered according to project needs. From 100mm to 2,000mm
- Ring Stiffness can be ordered as needed
- Various accessories and various options for jointing
SUPREME DURABILITY
- Rust, cracking and extreme weather resistance. Lifetime of MORE THAN 50 years
- Excellent resistance to various chemicals, both in strong acidic and alkali conditions
- Abrasion and sedimentation resistance due to smooth inner surface of the pipe, therefore minimizing friction
OUR PRODUCTS
PR TYPE - CORRUGATED PIPE
Type of outer winding, the surface on the inside of the product is smooth while the outside is formed with a reinforced frame. Mainly used as an underground drainage pipe.
Application: sewage pipes and drainage pipes.
|
PROPERTIES |
VALUE |
|
Density |
0,959 kg/cm3 |
|
Poisson Ratio |
0,4 |
|
Melt Flow Rate (190ºC / 5kg) |
<0,15 g/10 min <0,5 g/10 min |
|
Tensile strength |
23 Mpa |
|
Elongation when break? |
>600% |
|
Modulus of elasticity |
1.000 MPa |
|
Softening point? |
124 ºC |
|
Brittle point |
<-100 ºC |
|
Thermal conductivity |
0,4 ºC |
SQ TYPE - SPIRAL PIPE
Type of inner winding, smooth outer surface while in the middle there is a special reinforced frame. Mainly used in cargo and container well manufacturing.
Application: ventilation pipes, tunnels, pipes with the highest pressure and large diameter.
|
PROPERTIES |
VALUE |
|
Density |
0,959 kg/cm3 |
|
Poisson Ratio |
0,4 |
|
Melt Flow Rate (190ºC / 5kg) |
<0,15 g/10 min <0,5 g/10 min |
|
Tensile strength |
23 Mpa |
|
Elongation when break? |
>600% |
|
Modulus of elasticity |
1.000 MPa |
|
Softening point? |
124 ºC |
|
Brittle point |
<-100 ºC |
|
Thermal conductivity |
0,4 ºC |
VW TYPE - SOLID WALL PIPE
Solid wall type, mainly used for clean water, pipe connections such as T and elbow joints, as well as the continued process of completing pipe accessories.
Application: pressurized pipes, pipelines in marine vessels, pipe connections and special structures.
|
PROPERTIES |
VALUE |
|
Density |
0,959 kg/cm3 |
|
Poisson Ratio |
0,4 |
|
Melt Flow Rate (190ºC / 5kg) |
<0,15 g/10 min <0,5 g/10 min |
|
Tensile strength |
23 Mpa |
|
Elongation when break? |
>600% |
|
Modulus of elasticity |
1.000 MPa |
|
Softening point? |
124 ºC |
|
Brittle point |
<-100 ºC |
|
Thermal conductivity |
0,4 ºC |
