Shuanglin HDPE Pipe
December 2, 2019Alimak
December 3, 2019
TRENCOR
The surface miner is our newest product in our catalogue. Relatively new in Indonesia, this machine is able to blast and extract minerals and stones from mountains without the traditional method of blasting and its associated disadvantages.
American Augers builds the largest category of horizontal directional drills in the industry and a full range of auger boring machines. Developed and hand-crafted in the U.S.A., with the rugged user in mind, American Auger's rigs are built to last and backed with 24-hour worldwide support. Since 1945, Trencor's large-scale trenchers have revolutionized the pipeline industry. Their rock-solid structure makes them the longest lasting underground equipment line in the world. Many active machines in the field today have logged more than 40,000 hours. Trencor machines are handcrafted in the U.S.A. by American Augers. In the year xxx, PT. Kartika Macons was officially awarded the sole agent for Trencor surface miner sales and rental.
OUR PRODUCTS
TRENCOR TRENCHERS
THEY'RE MECHANICAL! AND THAT MAKES A BIG DIFFERENCE! WHY TRENCOR TRENCHERS?
- Trencor's exclusive Mechanical Drive ensures SIGNIFICANTLY LESS Tooth Wear!
- Maximum Breakout Force: Slow Chain Speed = More Torque
- Long machine life
- Low cost and easy repair
- Fuel savings
- High production
- Wide reange of Chain Speeds
SURFACE MINERS
The Greener Choice over Blasting!
- Greatly reduced noise and dust pollution
- Eliminates the need for drilling & blasting with dangerous explosives
- Productive alternative when in close proximity to populated areas
BUILDING FOUNDATIONS ROAD DEVELOPMENT MINING
Eliminates drilling & blasting
- Clean, even cut
- No need to invest in a primary crusher for new Greenfield development projects
- Mining operators have the opportunity to increase production wihtout permanent infrastructure; enabling rapid expansion beyond existing primary crusher capacity
- Consistent spoil sizes
- High production
- Cost competitive
ROTARY SURFACE MINING ATTACHMENT
No Need to drill or blast Safer, less noisy, lower liability, eco-friendly
- Clean, even cut Up to 4.5 m (14 ft. 9 in.) wide, 1.1 m (3 ft. 7 in.) deep
- The teeth get better digging penetration from the slow speed of the digging chain
- Usable debris without the need for primary crushers
- No Oversized fragmentation in demanding conditions produces manageable debris during excavating for fill material or easily hauled away by standard-sized trucks
- High production in demanding conditions
- Easily converts to a chain trencher
TRENCOR TR14 - FEATURES
Long life mechanical large track trenchers that provide unmatched performance for decades.
- Built to withstand hard rock trenching
- Flexible boom designs for changing job requirements
- Chain speeds to match the most challenging formations and productivity requirements
- Improved mainframe design for increased strength and durability
- Clean trench bottom and re-usable backfill
- Equipped with advanced load control software and PinPoint telematics
SPECIFICATIONS
Engine Tier 4 Final
| Engine Make | MTU |
| Engine Model | 6R1300C60 |
| Power HP (Kw) | 617 (460) @ 1900 RPM |
| Torque FT-LBS (N-m) | 2139 @ 1300 RPM |
| U.S. GAL/hr (L/hr) Full Power | 27.5 (104.1) |
| Fuel Capacity U.S. GAL. (L) | 405 (1533) |
| HYD Capacity U.S. GAL. (L) | 255 (965) |
| Hours Per Full Tank - Full Power | 14.7 |
| Transmission | Allison 6600 |
| DEF Capacity U.S. GAL. (L) | 25.4 (95) |
| Variable- Reversing Engine Cooling Fan | Hydraulic Drive |
Chain Speed Tier 4 Final
| First Gear | 107 (33) |
| Second Gear | 143 (44) |
| Third Gear | 213 (65) |
| Fourth Gear | 288 (88) |
| Fifth Gear | N/A |
| Reverse Gear | 56 (17) |
Chain Force - LB (KN) - Tier 4 Final
| First Gear | 180,640 (804) |
| Second Gear | 135,480 (603) |
| Third Gear | 90,926 (404) |
| Fourth Gear | 67,303 (299) |
| Fifth Gear | N/A |
| Reverse Gear | 346,608 (1542) |
Engine Tier 3
| Engine Make | CAT |
| Engine Model | C18 Tier 3, Stage IIIA |
| Power HP (Kw) | 630 (470) @ 2100 RPM |
| Torque FT-LBS (N-m) | 2042 (2768) @ 1400 RPM |
| U.S. GAL/hr (L/hr) Full Power | 34.6 (131.0) |
| Fuel Capacity U.S. GAL. (L) | 405 (1533) |
| HYD Capacity U.S. GAL. (L) | 255 (965) |
| Hours Per Full Tank - Full Power | 11.7 |
| Transmission | Allison 6600 |
| DEF Capacity U.S. GAL. (L) | 25.4 (95) |
| Variable- Reversing Engine Cooling Fan | Hydraulic Drive |
Chain Speed Tier 3 - FT/MIN (M/MIN)
| First Gear | 125 (38) |
| Second Gear | 166 (51) |
| Third Gear | 248 (76) |
| Fourth Gear | 335 (102) |
| Fifth Gear | N/A |
| Reverse Gear | 65 (20) |
Chain Force - LB (KN) - Tier 3
| First Gear | 120,636 (537) |
| Second Gear | 90,477 (402) |
| Third Gear | 60,723 (270) |
| Fourth Gear | 44,947 (200) |
| Fifth Gear | N/A |
| Reverse Gear | 320,115 (1424) |
Standard Attachments - In (mm)
| Boom Width | 27 (686) 2-D8x12 (305) |
| Trench Width X Max Depth | 28-40 (711-1016) X 20' |
| Boom Width | 35 (889) 2-D8x20 (508) |
| Trench Width X Max Depth | 38-48 (965-1219) X 16' |
| Boom Width | 47 (1194) 3-D8x16 (406) |
| Trench Width X Max Depth | 50-54 (1270-1372) X 14' |
| Primary Boom Depth - FT (M) | 8 (2.44) |
| Boom Extensions - FT (M) | 2 (.61), 4 (1.22), 8 (2.44) |
| Standard Digging Depths - FT (M) | 8-20 (2.44-6.10) |
Ground Specs
| Ground Speed Low - MPH (KM/H) | 0.4 (0.6) |
| Drawbar Pull Low (Max) - LB (KN) | 208,000 (925) |
| Ground Speed High (Max) - MPH (KM/H) | 1.2 (1.9) |
| Drawbar Pull High - LB (KN) | 75,000 (334) |
| Ground Bearing No Attach PSI (BAR) | 16.28 (1.12) |
Dimensions - In (mm)
| MACHINE LENGTH, NO ATTACHMENTS | 401.4 (10196) |
| MACHINE WIDTH, NO ATTACHMENTS | 139.7 (3548) |
| MACHINE OVERALL WIDTH | 151 (3835) |
| MACHINE OVERALL HEIGHT | 164.4 (4176) |
| SHIPPING WIDTH | 137.5 (3493) |
Weights - LB. (Kg)
| MACHINE WEIGHT (MINER-NO CONVEYOR) | 186,600 (84642) |
| MINIMUM OPERATING WEIGHT | 236,000 (107048) |
| SHIPPING WEIGHT (NO CWT, BOOM, TRACKS) | 278,000 (126099) |
| UNDERCARRIAGE WT TOTAL | 108,400 (49170) |
| COUNTERWEIGHT TOTAL | 50,000 (22680) |
TRENCOR TR16 - FEATURES
Long life mechanical large track trenchers that provide unmatched performance for decades.
- Increased horsepower to 950 HP C27 in Tier 4 and Tier 2
- Built to withstand hard rock trenching
- Clean trench bottom and re-usable backfill
- Equipped with advanced load control software and PinPoint telematics
SPECIFICATIONS
Engine
| Engine Make | CAT |
| Engine Model | C27 |
| POWER HP (Kw) | 950 @ 1800 RPM |
| TORQUE FT-LBS (N-m) | 3206 lb-ft @ 1200 RPM |
| U.S. GAL/hr (L/hr) FULL POWER | 47.5 |
| FUEL CAPACITY U.S. GAL. (L) | 596(2256) |
| HYD CAPACITY U.S. GAL. (L) | 238(900) |
| HOURS PER FULL TANK - FULL POWER | N/A |
| TRANSMISSION | Allison 8600 |
| DEF CAPACITY U.S. GAL. (L) | N/A |
| VARIABLE- REVERSING ENGINE COOLING FAN | Hydraulic Drive |
Chain Speed
| FIRST GEAR | 210 |
| SECOND GEAR | 288 |
| THIRD GEAR | 373 |
| FOURTH GEAR | 488 |
| FIFTH GEAR | N/A |
| REVERSE GEAR | 85 |
Chain Force - LB (KN)
| FIRST GEAR | 141664 |
| SECOND GEAR | 103303 |
| THIRD GEAR | 79784 |
| FOURTH GEAR | 61104 |
| FIFTH GEAR | N/A |
| REVERSE GEAR | 607838 |
| GROUND SPEED LOW - MPH (KM/H) | .40 MPH |
| DRAWBAR PULL LOW (MAX) - LB (KN) | 233,000 |
| GROUND SPEED HIGH (MAX) - MPH (KM/H) | 1.5 |
| DRAWBAR PULL HIGH - LB (KN) | 62000 |
| GROUND BEARING NO ATTACH PSI (BAR) | 17.64 |
| CONVEYOR SPEED - FT/MIN (M/MIN) | 1461 |
Standard Attachments - In (mm)
| BOOM WIDTH | 27 (686) 2-D8x12 (305) |
| TRENCH WIDTH X MAX DEPTH | 28-40 (711-1016) X 24' |
| BOOM WIDTH | 35 (889) 2-D8x20 (508) |
| TRENCH WIDTH X MAX DEPTH | 38-48 (965-1219) X 20' |
| BOOM WIDTH | 55 (1397) 3-D8x20 (508) |
| TRENCH WIDTH X MAX DEPTH | 58-60 (1473-1524) X 16' |
| PRIMARY BOOM DEPTH - FT (M) | 8 (2.44) |
| BOOM EXTENSIONS - FT (M) | 2 (.61), 4 (1.22), 8 (2.44) |
| STANDARD DIGGING DEPTHS - FT (M) | 8-24 (2.44-7.32) |
Dimensions - In (mm)
| MACHINE LENGTH, NO ATTACHMENTS | 435.4 (11060) |
| MACHINE WIDTH, NO ATTACHMENTS | 153.2 (3891) |
| MACHINE OVERALL WIDTH | 153.2 (3891) |
| MACHINE OVERALL HEIGHT | 169.8 (4313) |
| SHIPPING WIDTH | 148.3 (3767) |
Weights - LB. (Kg)
| MACHINE WEIGHT (MINER-NO CONVEYOR) | 210,000 (95256) |
| MINIMUM OPERATING WEIGHT | 240,000 (108862) |
| MAXIMUM OPERATING WEIGHT | 320,000 (145149) |
| SHIPPING WEIGHT (NO CWT, BOOM, TRACKS) | 135,000 (61236) |
| UNDERCARRIAGE WT TOTAL | 69,000 (31297) |
| COUNTERWEIGHT TOTAL | 7000 |
