• HOME
  • PRODUCTS
    • Shuanglin HDPE Pipe
    • Tower Crane
    • Alimak
    • Passenger Hoist
    • Trencor
    • IMER
    • Concrete Pump
    • Vibrator
    • Other Small Equipments
  • KEY PROJECTS
  • ABOUT US
  • CONTACT
Trencor
December 3, 2019
Vibrator
December 3, 2019
Published by root at December 3, 2019
Categories
Tags
    parallax background
    ALIMAK
    ALIMAK

    Alimak are well established as a world leading provider of vertical access solutions for a wide array of applications, most notably in the construction industry.

    Throughout a proud history stretching back over 70 years, Alimak have become recognised for a culture of constant innovation and product development, not least for pioneering the first mast climbing platform to utilise the hard wearing and reliable rack and pinion drive system. PT. Kartika Macons has worked with Alimak for over 20 years, and has supplied Alimak industrial passenger hoists to many industrial projects in various locations such as chimneys and factories, with local and international clients included.

    One out of the seven Alimak elevators working at the Aitik copper mine, Sweden

    Alimak06

    ALIMAK Elevator

    Passenger and freight industrial elevator Alimak SE passenger and freight elevators are designed from the drawing board not only to excel as people carriers in multiple applications, but also to be able to handle materials of loads up to 2,000 kilograms

    Passenger and freight industrial elevators

    Alimak SE passenger and freight elevators are designed from the drawing board not only to excel as people carriers in multiple applications, but also to be able to handle materials of loads up to 2,000 kilograms. All Alimak elevators are built to last in the harshest environments.

    Industry mover and shaker

    Alimak has been an industry leader in supplying elevators based on rack & pinion drive technology for more than 50 years. An install base of over 23,000 Alimak rack & pinion solutions across a broad spectrum of industries around the world, has given us a unique and extensive engineering knowledge gained from each individual installation.

    Alimak elevators daily demonstrate their ability to withstand the toughest challenges, providing reliable access, anytime and anywhere needed, from silos, chimneys, and boiler houses, to warehouses, container cranes, underground shafts, hull columns, and derrick towers.

    Modular system

    The enhanced efficiency delivered by the Alimak SE line stems in part from the unique modular design of the cars that provides a remarkable 30 different car sizes within the standard range. All industrial elevators are based on a variety of wall panels made of the Alimak self-locking, aluminium profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations.

    KEY BENEFITS
    • Designed for harsh environments
    • No enclosed hoistway or shaft is required – weight savings of up to 43,000 kg compared to other systems
    • Drive machinery located on the car, means no machine room is required
    • Modular design, delivering a wide range of car sizes and capacities
    • Fully collective elevator control system
    • Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel. All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars
    • Wide range of optional equipment and functions, delivering you the right equipment for each individual task
    • The A3 Remote Monitoring System gives the ability to monitor elevator operations 24/7 and pro-actively trace faults should they arise to avoid downtime.
    Product Specification
    Payload capacity
    300–2,000 kg
    Loading classifications (ANSI)
    Class A
    Travelling speed
    0.4–1.0 m/s
    Max. lifting height
    250 m (increased lifting height on request)
    Elevator car sizes
    30 car sizes available
    Car width (internal)
    0.78–1.56 m
    Car length (internal)
    1.04–2.60 m
    Car height (internal)
    2.17 m
    Motor control
    Frequency control (FC) or Direct-on-line (DOL)
    No. of motors
    1 or 2
    Power supply range
    380–500 V, 50 or 60 Hz, 3 phase
    Type of mast
    Type "A", "A-Mini", "FE" or "A-50"
    Standard compliance
    EN 81-20/-50, Pr EN 81-7, EN 81-43, ASME 17.1-2010 part 4.1, ASME 17.1-2010 part 5.7 (up to 1,000 lbs), AS 1735.9, AS 1170, and the technical regulation of the Eurasian Economic Union TR CU 010/2011. Other standards on request.
    Certificates
    Lift Directive Type certificate, Machinery Directive Type certificate, GOST R 53780-2010 certificate and TRCU 010/2011 certificate
    Length mast section
    1.508 m
    Alimak05

    ALIMAK SE-H

    Alimak has been an industry leader in supplying elevators based on rack & pinion drive technology for more than 50 years.

    Passenger and freight elevators

    Alimak SE-H passenger and freight industrial elevators are designed from the drawing board not only to excel as people carriers in multiple applications, but also to be able to handle materials of loads up to 3,300 kilograms. All Alimak elevators are built to last in the harshest environments.

    Industry mover and shaker

    An install base of over 23,000 Alimak rack & pinion solutions across a broad spectrum of industries around the world, has given us a unique and extensive engineering knowledge gained from each individual installation.

    Alimak elevators daily demonstrate their ability to withstand the toughest challenges, providing reliable access, anytime and anywhere needed, from silos, chimneys, and boiler houses, to warehouses, container cranes, underground shafts, hull columns, and derrick towers.

    Modular system

    The enhanced efficiency delivered by the Alimak SE-H line stems in part from the unique modular design of the cars that provides 9 different car sizes within the standard range. All elevators are based on a variety of wall panels made of the Alimak self locking, aluminium profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations.

    KEY FEATURES
    • Benefit from a highly useful variety of car sizes within the standard range, varying from the smallest providing 4 m2 floor space to the largest elevator car delivering 6 m2 floor area
    • Leverage a payload capacity of up to 3,300 kg on a single mast
    • Make full use of the flexible car door solutions that enable larger loads, optimal use of space and more flexible and easier loading
    • Exploit the forklift truck loading functionality that means even a forklift or a pallet jack can be transported to different levels
    • Plus, save time and money by removing the need for machine rooms and costly shafts
    • Fully compliant with all current US and EU regulations
    Product Specification
    Payload capacity
    2,100–3,300 kg (increased capacity on request)
    Loading classifications (ANSI)
    Class A, B, C1, C2, C3
    Travelling speed
    0.52 or 0.7 m/s
    Max. lifting height
    125 m (increased lifting height on request)
    Elevator car sizes
    9 car sizes available
    Car width (internal)
    1.56 m or 1.82 m
    Car length (internal)
    2.60 m – 3.90* m
    Car height (internal)
    2.35 m
    Motor control
    Frequency control (FC)
    No. of motors
    3
    Power supply range
    380–500 V, 50 or 60 Hz, 3 phase
    Type of mast
    Square (A-50), tubular steel with integrated rack
    Length mast section
    1.508 m
    Standard compliance
    EN 81-20/-50, Pr EN 81-7, ASME 17.1-2010 part 4.1, ASME 17.1-2010 part 5.7 (up to 1,000 lbs), AS 1735.9, AS 1170, and the technical regulation of the Eurasian Economic Union TR CU 010/2011. Other standards on request.
    Certificates
    Lift Directive Type certificate, GOST R 53780-2010 certificate and TRCU 010/2011 certificate

    * Max. 3.12 m car length on 1.82 m elevator cars.

    ALIMAK-SE-TM-SE-Ex-TM

    ALIMAK SE TM & SE-Ex TM

    The high capacity ALIMAK SE TM & SE-Ex TM goods and passenger elevator series fits in all kinds of industrial applications and are built to last in the most extreme environments. Alimak SE TM elevators are designed to transport materials weighing up to seven tonnes when required, and available for both safe areas as well as hazardous areas. Benefits at a glance
    • Benefit from a highly useful variety of large elevator car sizes, varying from the smallest providing 4.7 m2 (50 sq. feet) floor space to the largest car delivering 11.9 m2 (128 sq. feet) floor area
    • Leverage a payload capacity of up to 7,000 kg (15,400 lb)
    • Designed for harsh environments
    • Explosion protected option
    • Exploit the forklift truck loading functionality that means even a forklift or a pallet jack can be transported to different levels
    • Plus, save time and money by removing the need for machine rooms and costly shafts
    Elevator design

    The enhanced efficiency delivered by the ALIMAK SE TM & SE-Ex TM goods and passenger elevator series stems in part from the unique modular design of the elevator cars that provides a large number of different car sizes with floor spaces up to 11.9 m (128 sq. feet). Made of extruded anodized saltwater-proof aluminum and hot dipped galvanized steel, the Alimak SE TM elevator car is built to last in the most extreme environments. The elevator has been designed with two mast towers to carry the large elevator car and a sync axis, ensuring that the car always travels straight. Alimak SE TM elevator series are push button operated from car and landings and has a modern collective control system with internal fault diagnostics.

    Compact, powerful drive units

    Two compact and powerful drive units are located on top of the car itself, which means more useable space as there is no need for a separate machine room. Each drive comprises of four or six electric drive motors with a choice of direct-on-line control (DOL) or frequency control (FC). The FC drive not only ensures smooth acceleration and deceleration, but also reduces wear and tear on elevator components such as brakes.

    Safety

    The SE TM goods and passenger elevator series incorporates all the safety features that have made Alimak elevators a benchmark for the elevator industry worldwide. The unique progressive Alimak safety device comes into operation should the elevator exceed the rated speed, bringing the car to a smooth stop. The elevator is also fitted with an overload sensing device and a centrifugal brake that allows passengers to be lowered to the landing below in the event of a power failure.

    Forklift truck loading

    The optional car to landing lock device is used when fork­lift loading is demanded. The elevator has been designed in such a way that all of the forklifts in the world normally used for this kind of application fit in the car enabling easy transport of forklifts between landing levels. The load carrying structure is enhanced by the stiff car floor, which is welded of formed steel sheeting for additional strength.

    KEY FEATURES
    • Modular design delivering you a wide range of car sizes and capacities
    • Drive machinery located on the car means no costly machine room is required
    • Fully collective lift control system
    • Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanised steel. All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars
    • Wide range of optional equipment and functions deliv­­ering you the right equipment for each individual task
    • Remote Monitoring System – The online A3 remote control can also be added to monitor lift operations 24/7 and pro-actively trace faults should they arise to avoid downtime.
    Product Specification
    Payload capacity, FC
    1,200–2,800* kg
    Payload capacity, DOL
    450–2,000 kg
    Loading classifications, ANSI
    Class A, B, C1, C2, C3
    Travelling speed, FC
    0.5–0.7 m/s
    Travelling speed, DOL
    0.32–0.6 m/s
    Max. lifting height
    80 m (increased lifting height on request)
    Motor control
    Frequency control (FC) or Direct-on-line (DOL)
    No. of motors
    1–3
    Elevator car sizes
    Several car sizes available, min. 0.78 x 1.82 m, max. 1.30 x 3.90 m
    Power supply range
    380–690 V, 50 or 60 Hz, 3 phase
    Fuse ratings
    35 A, 63 A or 100 A
    Type of mast
    Rectangular (FE) or square (A50), tubular steel with integrated rack
    Length mast section
    1.508 m
    Standard compliance
    EN 81-20/-50, Pr EN 81-7, ASME 17.1-2010 part 4.1, ASME 17.1-2010 part 5.7 (up to 1,000 lbs), AS 1735.9, AS 1170, and the technical regulation of the Eurasian Economic Union TR CU 010/2011. Other standards on request.
    Certificates
    Lift Directive Type certificate, ATEX Directive Type certificate, GOST R 53780-2010 certificate and TRCU 010/2011 certificate
    Protection class ATEX
    Zone 1** or 2, Gas group I, IIA or IIB, Temp. class T1–T3 (T4)
    Protection class NEC
    Class 1 Division 2, Gas group C or D, Temp. class T1–T3 (T4)
    Dust, NEC
    Class 2, Division 2, Dust group F and G

    * Depending on cabin area.

    ** Zone 1 up to 1,600 kg payload capacity.

    For other demands or specifications, please consult your Alimak representative.

    B0004P 0542

    ALIMAK SE-Ex

    Explosion proof, passenger and freight industrial elevator for hazardous areas Built on the experience gained from thousands of installations worldwide, the latest Explosion proof elevator ALIMAK SE-Ex is designed to deliver on your access requirements for heavy transport needs in hazardous environments. The ALIMAK SE-Ex sets a new benchmark for the safer, efficient vertical transportation of personnel and materials on derricks, hull columns, platform modules, oil refineries, LNG terminals, chemical plants and other similar industrial environments.

    New design, new flexibility

    Increased efficiency, productivity and safety are just three of the benefits delivered by the new Explosion proof elevator ALIMAK SE-Ex range of freight and passenger elevator solutions from the company that pioneered the rack and pinion drive system back in 1962 to safely and efficiently transport people and materials. The enhanced efficiency delivered by the ALIMAK SE-Ex stems in part from the unique modular design of the cars that provide many different car sizes within the standard range. All elevators are based on a variety of wall panels made of the characteristic Alimak self locking, aluminum profiles. These wall panels meet different elevator needs, and create adaptable floor and roof configurations. A more rigid car design is built on a solid car floor and stiffened beams, which supports greater load capacity on a single mast.

    Remote monitoring

    The well proven Alimak Lift Control system ALC-II ensures both efficiency and ease of use. As an added bonus, Alimaks’ online A3 remote monitoring system can be fitted as an accessory. This gives the ability to fully monitor the elevator and trace any faults instantly from remote locations. This enhancement to our standard control system can speed up corrective diagnostics and minimize downtime.

    KEY BENEFITS
    • No shaft is required – weight savings of up to 43,000 kg compared to other systems
    • Modular design delivering a wide range of car sizes and capacities
    • Fully compliant with ATEX and EN-13463 as well as ANSI 17.1 and NEC codes. Witness tested by third party
    • Two individual elevators can operate on one single mast column for greater operational flexibility
    • Drive machinery located on the car means no costly machine room is required
    • Fully collective elevator control system
    • Durable materials: extruded aluminium car wall panels with car support frame and mast sections of hot dip galvanized steel. All stainless steel electrical cabinets and landing control boxes. Optional stainless steel cars are available
    • Wide range of optional equipment and functions delivering you the right equipment for each individual task
    • Remote Monitoring System – The online A3 remote control can also be added to monitor elevator operations 24/7 and pro-actively trace faults should they arise to avoid downtime.
    Product Specification
    Max. payload capacity (SE TM)
    3,200–7,000* kg (7,250–15,400* lb)
    Max. payload capacity (SE-Ex TM)
    2,500–6,000* kg (5,500–13,200* lb)
    Loading classifications (ANSI):
    Class A, B, C1, C2, (C3)
    Travelling speed
    0.52 m/s (105 fpm)
    Lifting height
    Up to 70** m (230** ft)
    Motor control
    Direct-on-line (DOL) or Frequency Control (FC)
    No. of motors
    2x2 or 2x3
    Internal car width (W)
    1.82 m – 2.86*** m (5’-11 2/3’’– 9’-4 2/3’’***)
    Internal car length (L)
    2.60 m – 4.16*** m (8’-6 1/4’’–13’-7 2/3’’***)
    Internal car height
    2.35 m or 2.50 m (7’-8 1/2’’ or 8’-2 2/4’’)
    Door opening height
    2.35 m or 2.50 m (7’-8 1/2’’ or 8’-2 2/4’’)
    Power supply range
    380–500 V, 50/60 Hz, 3 phase
    Type of mast
    Square (A-50), or rectangular (FE), tubular steel with integrated rack
    Length mast section
    1.508 m (4’-11 3/8’’)
    Protection class (ATEX)
    Zone 2, Gas group IIB, Temp. class T3

    * Max. payload capacity with FE-mast is 4,500 kg (9,900 lb)

    ** Increased lifting height on request.

    *** Car and door size can be extended further depending on payload, width/length and loading classification. Max. car area on SE-Ex TM is 8.9 m2 (95.8 ft2).

    Alimak04

    ALIMAK SE SPECIAL

    Alimak possesses unmatched experience from customized vertical access solutions for the most varying purposes and environments. Here are some examples of what we can deliver: Kungsträdgården Park, Stockholm

    This special 3.5 tonne elevator literally pops up from under the street. It is used by the Stockholm Water Company to transport service personnel and replacement parts to a pumping station 4 m below ground.

    Royal Victoria Docks, London

    Four external, panoramic elevators provide access to the eye catching footbridge in London's Docklands. Each car takes 11 passengers and the total height of travel is 14 m.

    New Telecommunications Centre, Kuwait

    A twin-masted platform with a capacity of 12 tonnes is used by the Ministry of Public Works to service the new Telecommunications Centre. The platform travels a total of 62 m.

    Additional examples can be found in the Landmarks section.

    Product Specification
    Payload capacity
    Biggest so far is 24,000 kg
    Speed
    up to 1.0 m/s (depending on the capacity)
    Max. lifting height
    Practically unlimited (highest so far is 645 m)
    Elevator car size
    Standard range modularity enables customised car widths and lengths
    Motor control
    Direct-On-Line (DOL) or Frequency Control (FC)
    Safety device type
    GF/GFD
    Power supply range
    380–690 V, 50 or 60 Hz, 3 phase
    Type of mast
    Any suitable Alimak mast
    Length mast section
    1.508 m
    Rack module
    5 or 8
    Alimak01

    ALIMAK FM & FM-Ex

    The new four-masted ALIMAK FM cargo elevator series fits on all types of industrial applications and is available both for safe areas as well as hazardeous areas. The Alimak cargo elevator series is designed to handle materials weighing up to 12,000 kilograms when required. All Alimak elevators are built to last in the most extreme environments.

    The typical Alimak cargo elevator has a payload capacity of between 5,000 kg to 12,000 kg. The cargo elevator ensures easy transportation of various heavy duty goods and consignments between different levels. Loading and unloading has never been easier with crane or forklift, since the elevator floor will level with top most landing without permanent equipment above.

    Well proven in the offshore industry

    The new Alimak FM builds on the experience gained from several installations offshore, which have been given a vote of confidence by customers across the industry.

    Made of hot dipped galvanized steel the Alimak cargo elevator handles the toughest working environments. Four galvanized mast towers / guide rails gives a very slim installation profile since they are recessed into the floor design. The Alimak elevator can be provided with a wide range of optional equipment and functions deliv­ering you the right equipment for each individual task.

    Rack & pinion elevator benefits

    The Alimak cargo elevator incorporates features that have made Alimak elevators a benchmark for the offshore industry worldwide, which elevators to less demanding environments takes advantage of. The Alimak FM cargo elevator platform have it’s drive machinery fitted beneath the elevator floor, along with brakes and gears, thus eliminating the need for a separate machine room or lift-well. The operation is not affected by rolls, pitches or heaves and the design is well suited for high earthquake loads. These benefits and the narrow installation profile makes the Alimak cargo elevator suitable for harsh environments.

    KEY BENEFITS
    • Easy loading and unloading with crane or forklift since the platform floor will level with top most landing without permanent equipment above
    • Wide range of sizes and capacities
    • Slim installation profile
    • Drive machinery located beneath the elevator floor means no costly and bulky machine room is required
    • Fully collective elevator control system
    • Explosion protected option
    • DNV certified for offshore use
    • Design well suited for high earthquake loads
    • Durable materials: car support frame and guide rails of hot dip galvanised steel. All stainless steel electrical cabinets and landing control boxes.
    • Wide range of optional equipment and functions delivering you the right equipment for each individual task
    Product Specification
    Payload capacity
    5,000–12,000 kg
    Static loading capacity
    Up to 15,000 kg
    Travelling speed
    0.25 m/s
    Lifting height
    Up to 15* m
    Motor control
    Frequency Control (FC)
    No. of motors
    8
    Elevator platform width
    (W) 3.35 m – 3.58* m
    Elevator platform length
    (L) 3.38 m – 4.54* m
    Access opening
    W -0.84 m, L -0.60* m
    Power supply range
    380–690 V, 50/60 Hz, 3 phase
    Type of mast
    Square guide rail with integrated rack
    No. of masts
    4
    Length mast section
    1.508 m
    Protection class ATEX
    Zone 2, Gas group IIB, Temp. class T3

     

    ALIMAK-TR-H-TR-H

    ALIMAK TR-H & TR-H Ex

    Passenger and freight traction elevators for tough industrial Environments.

    The Alimak traction elevator series – ALIMAK TR-H is designed and built to perform in the world’s harshest environments. The elevator will improve operational efficiency, give superior HSE performance and reduce maintenance costs in any industrial application. With surface treatment corrosion classification up to C5 and ingress protection rating up to IP54, the new elevators are made for the toughest environments on the planet. The Ex version – ALIMAK TR-H Ex gains trust from the company’s long term experience in delivering Ex elevators based on rack and pinion drive technology since the first one was delivered to the Kuwait National Petroleum Company in 1975.

    Peace of mind in the world’s harshest environments

    Alimak is the name you can trust for reliable, productive, and economical vertical access solutions. Our offering is comprised of industrial elevators based on traction as well as rack and pinion technologies, and a wide range of after sales services. We have a long track record of successfully carrying out projects for EPC companies and end users.

    Wide range of car sizes and capacities

    The modular design of the two traction elevator series Alimak TR-H & TR-H Ex provide several different car sizes within the standard range — meeting just about every imaginable transport need from 450 kg to 5,000 kg (990 — 11,020 lbs) for both non-hazardous and Ex environments. Additional sizes and specifications can be provided on request.

    Robust design

    The elevator car is made from durable materials including stainless steel, aluminum or painted steel with bumper rails and diamond plate flooring together with other options. Elevator doors can be manual or heavy-duty automatic with fire rated doors as option. Robust industrial design gives the elevator the ability to handle your toughest working environments.

    Remote monitoring

    The Alimak TR-H elevator is fitted with the built-in A3 remote monitoring system as standard and can be added on as an accessory for our Alimak TR-H Ex elevators. A3 gives you the ability to fully monitor the elevator via a mobile network, the internet or your local network with a Modbus TCP client and trace any faults instantly. The system allows for an improved response time for corrective diagnostics to avoid elevator downtime. A3 is free during warranty period.

    Codes and regulations

    Alimak TR-H elevator series complies with European Lift Directive 95/16/EC, EN 81-20/50, with additional local and project specific regulations on request.

    Alimak TR-H Ex elevator series complies with European Lift Directive 95/16/EC, EN 81-20/50, ATEX regulations – offering protection in Zone 2, Gas group IIB and Temperature class T1–T3, with additional local and project specific regulations on request.

    Alimak Traction Elevators

    Present on six continents, our sales, service and rental companies support customers with a broad spectrum of unmatched on demand products and services.

    KEY BENEFITS
    • Rugged design, for tough environmental conditions
    • Wide range of car sizes and capacities
    • Indoor or outdoor installations
    • Explosion proof as standard option across range
    • Ingress protection rating up to IP54
    • Remote monitoring system (Option on ALIMAK TR-H Ex)
    • Robust manual and automatic doors
    • Surface treatment: corrosion classification up to C5
    • Extensive documentation for materials, welding and testing
    • Wide range of optional equipment and functions
    Product Specification
    Capacity
    450 kg – 5,000 kg (990 – 11,020 lbs)
    Speed
    1.0 m/s (196 fpm) *
    Travel height, max.
    40 m (130 ft) *
    Car width, internal
    1.04 m - 2.86 m (3’-4 15/16” – 9’-4 19/32”)
    Car length, internal
    1.17 m - 3.12 m (3’-10 1/16” – 10’-2 53/64”)
    Car height, internal
    2.1 m – 2.4 m (6’-10 43/64” – 7’-10 1⁄2”)
    Door opening width
    0.67 m – 2.83 m (2'-2 4⁄10" – 9’-3 27⁄64”)
    Door opening height
    2.0 m – 2.35 m (6’-6 7⁄10” – 7’-8 1⁄2”)
    No. of landings
    2 – 16
    Control system
    Selective collective
    Motor control
    Frequency Control (FC)
    Power supply range
    380–690 V, 50 or 60 Hz, 3 phase
    Operating temperature range
    +5°C to +40°C
    Regulations
    EN 81-20/50
    Protection class (TR-H)
    None (Safe area)
    Protection class (TR-H Ex)
    ATEX: Zone 2, Gas group IIB, Temp. class T1–T3

    * Increased speed / travel height on request.

    ALIMAK-TR

    ALIMAK TR

    Passenger and freight traction elevators for industrial environments

    The ALIMAK TR traction elevator range is engineered for industrial applications, providing reliable access, anytime and anywhere needed. The elevator is suited to many applications in industries like power plants, mines, cement plants, and oil & gas facilities, as well as factories and warehouses.

    Peace of mind in industrial environments

    Alimak is the name you can trust for reliable, productive, and economical vertical access solutions. Our offering is comprised of industrial elevators based on traction as well as rack and pinion technologies, and a wide range of after sales services. We have a long track record of successfully carrying out projects for EPC companies and end users.

    Wide range of car sizes and capacities

    The modular design of the Alimak TR elevator series provide several different car sizes within the standard range — meeting just about every imaginable transport need from 300 kg to 5,000 kg (660 — 11,020 lbs). Additional sizes and specifications can be provided on request.

    Durable design

    The elevator car is made from durable materials including stainless steel or painted steel with bumper rails together with other options. Automatic elevator doors with fire rated doors as option. Durable industrial design gives the elevator the ability to handle your working environments with ease.

    KEY BENEFITS
    • Wide range of car sizes and capacities
    • Machine room as standard with machine-room-less solutions available
    • Elevators designed to ensure outstanding ride quality, low levels of noise and car vibrations fulfill even the most strict requirements
    • Designed for ease of installation and use, providing spatial efficiency and reliability
    • Designed to give passengers more personal space. A larger car can be used for standard-sized shafts
    • Unique tailor made design options, customized according to your needs in order to perfectly fit in your space
    • Ingress protection rating up to IP54
    • Surface treatment: corrosion classification up to C5
    • Detailed technical installation and operation manuals
    • Wide range of optional equipment and functions
    Product Specification
    Capacity
    300 kg – 5,000 kg (660 – 11,020 lbs)
    Speed
    0.5 – 1.5 m/s (98 – 295 fpm) *
    Travel height, max.
    60 m (196 ft) **
    Car width, internal
    0.8 m – 2.8 m (2’-7 1⁄2” – 9’-2 1⁄4”)
    Car length, internal
    1.0 m – 3.1 m (3’-3 1⁄4” – 10’-2”)
    Car height, internal
    2.2 m – 2.67 m (7’-2 2⁄4” – 8’-9 1⁄10”)
    Door opening height
    2.0 m – 2.5 m (6’-6 7⁄10” – 8’-2 4⁄10”)
    No. of landings
    2 – 20
    Control system
    Selective collective
    Motor control
    Frequency Control (FC)
    Power supply range
    400 V, 50 or 60 Hz, 3 phase
    Regulations
    EN 81-20 & ASME A17.1 Part 2

    * Max speed on cars with capacity 2,500 kg and above is 1.0 m/s (196 fpm)

    ** Increased travel height on request.

    ALIMAK-ME

    ALIMAK ME

    The Alimak Marine Elevator is designed specifically for marine applications including passenger and freight elevator transportation across a range of marine vessels.

    Built on Alimak’s renowned traction technology, the new ALIMAK ME marine elevator is available in two car sizes, features loading capacities of up to 1,600 kg and has superior ride comfort, all without the need for a machine room.

    The elevator consists of a high quality, reinforced carbon steel car frame with progressive safety gear in accordance to European regulations and is available with the option of hot dip galvanization, suitable for high humidity areas.

    Emergency scenarios have been factored in with an escape hatch in the ceiling of the elevator car, an emergency escape ladder and LED roof lighting with emergency diodes. The landing doors are specially reinforced for marine application and for installation in the welded shaft.

    Alimak ME marine elevators comply with EN81-20/50, ISO 8383, DNV Rules for lifts and 2014/33/EU regulations. The elevators are standardised and designed according to client’s optimal shaft utilization, fit for purpose.

    Industrial vessels are often found in harsh environments, and any effective marine elevator therefore needs to be capable of handling tough weather conditions as well as unavoidable roll, pitch and heave as specified in ISO8383. Alimak’s marine elevators can be relied upon during their lifetime.

    Alimak has supplied elevators for the marine and offshore market since 1974 and continues to invest in new technologies and concepts to improve the productivity and sustainability of the industry.

    KEY BENEFITS
    • Standardized design for marine applications
    • Based on MRL design (Machine Room Less)
    • Mechanical and electrical interfaces clearly specified
    • Less interfaces and simpler installation
    • Energy efficient machinery
    • Eco-efficiency
    • Superior ride comfort
    • Fully collective elevator control system
    • Durable materials: stainless steel car wall panels and roof with car support frame of carbon steel
    • Wide range of optional equipment and functions delivering you the right equipment for each individual task
    • Available 3D model for implementation during early phase of the vessel design
    Product Specification
    Capacity
    300 kg – 5,000 kg (660 – 11,020 lbs)
    Speed
    0.5 – 1.5 m/s (98 – 295 fpm) *
    Travel height, max.
    60 m (196 ft) **
    Car width, internal
    0.8 m – 2.8 m (2’-7 1⁄2” – 9’-2 1⁄4”)
    Car length, internal
    1.0 m – 3.1 m (3’-3 1⁄4” – 10’-2”)
    Car height, internal
    2.2 m – 2.67 m (7’-2 2⁄4” – 8’-9 1⁄10”)
    Door opening height
    2.0 m – 2.5 m (6’-6 7⁄10” – 8’-2 4⁄10”)
    No. of landings
    2 – 20
    Control system
    Selective collective
    Motor control
    Frequency Control (FC)
    Power supply range
    400 V, 50 or 60 Hz, 3 phase
    Regulations
    EN 81-20 & ASME A17.1 Part 2

    * Max speed on cars with capacity 2,500 kg and above is 1.0 m/s (196 fpm)

    ** Increased travel height on request.

    root
    root
    KARTIKA MACONS

    PT. Kartika Macons - Head Office

    Proyek Pertokoan "Jayakarta Citra Lestari"
    Jl. P. Jayakarta No. 72 - 74 Blok B 5 - 6
    P.O.BOX 1560 - Jakarta
    Indonesia, 10730

    Phone

    (+62 21) 601 1136

    Fax

    (+62 21) 626 0107

    Sales Email

    ptkm@indo.net.id

    Aftersales Email

    sales-support@kartikamacons.com



    Marketing Office - For Shuangline HDPE Pipe

    SOHO Pancoran. Tower Noble 1601, 1602, 1612.
    Jl. Letjen M.T. Haryono No.Kav. 2-3,
    Tebet, Jakarta Selatan, DKI Jakarta 12810 -INDONESIA

    Phone

    (+62 21) 5059 5888
    (+62 21) 5046 4888

    Fax

    (+62 21) 5057 5888
    (+62 21) 5011 6093

    Sales Email

    indotelar@gmail.com


    © 2019 Kartika Macons. All Rights Reserved. Powered by PT. Solusi Artha Tama.